Concrete Floor Slab Formwork System
Concrete Floor Slab Formwork System
moladi designer of a unique patented plastic formwork system has recently design a new Suspended slab formwork system for casting reinforced Suspended concrete slabs - Floor slabs to enable the construction of multi-level structures to be built faster better stronger for less. This requires formwork technology to be able to carry the dead loads and impact when casting slabs in-situ
The photo below depicts the completed suspended concrete roof slab
The 20 square meter slab was constructed with 2 cubic meters of 25 mpa concrete and 100 kg of steel
The cost for the slab is drastically reduced because of the formwork configuration that allows for multiple permutations as can be seen below – Less than the cost associated with rib and block precast system
The moladi Slab System allows for beams to be increased or decreased in numbers, thickness, depth and width allowing for 100 % optimization - and most importantly only one prop per room 9depending on size) for early stripping/removing of formwork
moladi slab formwork system
For more information visit our website - www.moladi.net
Tags: - Slab, beams, bearing, building, buildings, concrete, decking, double, floor, formwork, load, loads, moladi, multistorey, multilevel, propping props, slab, span, story system, system, plastic formwork, concrete slab, suspended concrete slabs, concrete formwork, concrete slab formwork, suspended concrete slab formwork, moladi, plastic shutter system, concrete, Alternative Building Technologies, concrete roof slab system, precast concrete slabs, concrete roof slab, Rib and Block, slabs, Lattice Beam, Girder, rebar, polystyrene, concrete slab formwork, rib and block, precast, roof slab, Concrete slab, floor slab, precast floor slabs, moladi, concrete shutter, multi-floor, loads,
Concrete Floor Slab Formwork System
Concrete Floor Slab Formwork System |
Suspended concrete slab formwork
moladi In-situ floor Suspended slab formwork system
moladi designer of a unique patented plastic formwork system has recently design a new Suspended slab formwork system for casting reinforced Suspended concrete slabs - Floor slabs to enable the construction of multi-level structures to be built faster better stronger for less. This requires formwork technology to be able to carry the dead loads and impact when casting slabs in-situ
The photo below depicts the completed suspended concrete roof slab
Concrete Floor Slab |
The cost for the slab is drastically reduced because of the formwork configuration that allows for multiple permutations as can be seen below – Less than the cost associated with rib and block precast system
The moladi Slab System allows for beams to be increased or decreased in numbers, thickness, depth and width allowing for 100 % optimization - and most importantly only one prop per room 9depending on size) for early stripping/removing of formwork
Build faster than rib and block precast floor slab |
moladi slab formwork system
For more information visit our website - www.moladi.net