Suspended concrete slab formwork - moladi

Concrete slab formwork

Suspended concrete slab formwork - moladi

Suspended concrete slab formwork - moladi 

In-situ floor Suspended slab formwork system

moladi designer of a unique patented plastic formwork system has recently design a new Suspended slab formwork system for casting reinforced Suspended concrete slabs - Floor slabs to enable the construction of multi-level structures to be built faster better stronger for less.  This requires formwork technology to be able to carry the dead loads and impact when casting slabs insitu
The photo below depicts the completed suspended concrete roof slab

Suspended concrete slab formwork

The 20 square meter slab was constructed with 2 cubic meters of 25 mpa concrete and 100 kg of steel

The cost for the slab is drastically reduced because of the formwork configuration that allows for multiple permutations as can be seen below

The moladi Slab System allows for beams to be increased or decreased in numbers, thickness, depth and width allowing for 100 % optimization - and most importantly only one prop per room 9depending on size) for early stripping/removing of formwork
Concrete slab formwork system

moladi Suspended Slab Formwork System

For more information visit our website -
Tags: - Slab, beams, bearing, building, buildings, concrete, decking, double, floor, formwork, load, loads, moladi, multistorey, multilevel, propping  props, slab, span, story  system, system, plastic formwork, concrete slab, suspended concrete slabs, concrete formwork, concrete slab formwork, suspended concrete slab formwork, moladi, plastic shutter system, concrete, Alternative Building Technologies, concrete roof slab system

For more on moladi

Green Building Council - Sustainable Affordable Housing Delivery